How to Carve on a Longboard: A Comprehensive Guide

Carving on a longboard is one of the most exhilarating activities that you can do. The feeling of carving down a hill, sliding through turns, and gaining speed is something that’s hard to beat. It’s like ocean surfing that you are surfing on waves.

However, Carving isn’t an easy skill to learn- it takes practice and dedication as it is one of the most popular longboarding disciplines. This blog post will discuss how to carve on a longboard by getting yourself through a comprehensive guide.


How helpful is the carving tactic to longboarders?

It’s great to see that you’re interested in learning one of the best longboard skills – Carving, but is that a helpful tactic for longboarders? The answer is that it depends on the situation.

For example, suppose you’re going downhill and need to turn around. In that case, a corner carving might be your best bet as you’ll likely go faster while turning than without this tactic because of the way your board can slide sideways for additional momentum. At the same time, though, when grinding rails down a hill, you’ll want to use a different tactic and rub on the top of them.

So what is carving?

Carving is a technique that many longboarders love because it allows for speed while turning without having to worry too much about sliding out from under your board or using as much effort to stay on its surface. In other words, Carving is a way to make your longboard more responsive and agile.

This technique has been used in snowboarding for years because it allows riders to maintain their balance without relying on the friction of wax or ice beneath them for stability.

So now, the question arises, how to learn this technique? Well, let’s go through a step-by-step guide to learn carving at its best.

1. Wear Your Safety Guards and Find a Wide Lonely Place

This may sound like a cliché, but it is the most crucial point of this guide. You need to wear your safety guards and find a place that has no obstacles or cars if you lose control over your board as soon as you try carving setup for the first time.

Remember: always be on safety gears when riding a longboard!

You can either go for an expansive parking lot or sloppy hilly side of a road; either way, they are equally suitable for beginners because you will be able to get the entire length of your longboard under control without any interruptions.

2. Carving on a Longboard Requires Full Concentration

Pushing forward for momentum on a downhill with your back foot, head straight for the loose gravel at the bottom. Then, use your front foot to find that perfect balance.

Step on the back of the board with your rear foot and push it forward as you lean into the turn. Use this momentum to bring yourself around in a wide arc, then step off with the other foot and repeat!

Don’t let your concentration change for even a second, especially when you’re a beginner, as if you do so, you might get yourself into a weird turn where the board simply won’t go, and you end up getting yourself injured.[1]

3. It's Time to Do Toe Carving

Now, it’s time to learn how to do toe carving. This is a bit more complicated than what you’ve learned so far, as the technique requires a little more balance and coordination.

Toe carving will allow you to make even sharper turns at higher speeds because it allows for much tighter arcs. However, the downside of this type of turn-making is that it requires your feet to do most of the work.

If possible, aim for the left side of the street when standing because fewer riders will be coming at you from that direction. Push off with your back foot heading straight down the heel before getting too

Toe carving is not for beginners, and if you want to learn how it’s best, you keep practicing this skill until you gain some confidence in it.

4. Concentrate on Your Body Move

Bring your heels as close to the board’s tail as possible, but be careful not to lift them off of the board. Now start carving to the right.

Finally, pause your move once you get all the way to the far-right side of your street or parking lot (whichever one you’re practicing in).

5. Practice Regularly

Carving isn’t intricate, and anyone can learn how to do it. It is just about mastering the correct technique, which takes practice. When you practice regularly, you will be able to work out how to carve on a longboard and become an expert with the skill.

Keep practicing it for some time, and you will see how fun it is and will undoubtedly master this longboarding technique.

Few Important Things to Note About Carving

  • This technique is straightforward, and it’s just about mastering the correct way of doing it.
  • When you practice regularly, you will be able to work out how to carve on a longboard and become an expert with this skill.
  • It is not hard at all, but it does require a lot of practice.
  • You need to find the best spot for practicing this skill, but any longboarder knows that Carving is all about being able to do it on different terrains.
  • When you carve, take your weight off of your front foot and place it behind slightly so as to push with your back foot.
  • The trick is to tilt your body slightly forward and push with the tail of the board as you lean into it, much like a car going around a turn.

Wrapping Up

Longboard carving is an aesthetically pleasing riding style of longboarding that requires a great passion for learning. While it can be entertaining and charming to watch someone practice these tactics, it’s also a high-level artistic skill.

While learning this skill is one thing, having the right longboard for Carving is another. You can go for the best carving longboards that are for Carving and suitable for cruising.

Table of Contents

Share This Story, Choose Your Platform!

Share on facebook
Share on twitter
Share on linkedin